Four ways to build a case
Master Base
Vaca Muerta blocks, protected. Offered separately.
Saved bases
Your earlier cases and models.
Quick Run
Quick case, manual or preloaded.
New case
From scratch, with manual editing.
Quick Run, on one screen
You enter area, lateral length, spacing, landing zones, base production, EUR, plateau % and ramp. It calculates wells to drill, first-year wells, rigs and plateau.
Wells by hand
The field New wells to drill · manual replaces the geometric calculation (area ÷ lateral × spacing × landing zones − already drilled).
Quick Run can be configured further: after running it, the case stays open. You go through Type well, Development and Economics, move the levers in the last step and save it as your own case. Note: if you run Quick Run again, the values are recalculated and manual adjustments are lost.
Production Designer: a case from start to finish
The Production Designer is a tab of the Modeler: you design how a project's production develops and, with one click, take it to the rest of the model. Go through the five steps with a real case, Loma Campana, and click any screenshot to see it larger.
Example case: Loma Campana with Master Base data. Values change with the constraints, prices and costs you define. The Designer also exports to Excel, with live formulas and charts. The screenshots show the interface in Spanish.
Save cases and come back to them
A case that ends up the way you want is saved with a name in your own base, and later you open it, add it to a portfolio or take it as a starting point.
Save
"Save case" in the last step: you choose the base and the name, and all its parameters are saved.
Protect
A protected base is not overwritten by mistake, just like the Master Base.
Reuse
Saved bases are a source for the wizard, the Portfolio and the TwinRock Designer.
Where they live: today, in the browser of whoever creates them; to share results they are exported to Excel. With the shared service Coming soon they live in your company's space and your team sees them (see Shared use).
Run a portfolio
It runs several blocks at once and combines them into a single result: the value of a company, an operator or the whole set.
Consolidated and by group
The total and each group (operator or tier) side by side: production, CAPEX, OPEX, NPV and break-even.
Outputs
It is saved as a new base, exported to Excel with one row per block, or published to your company's space for TwinRock Partners Coming soon (today, as a JSON file).
TwinRock Designer
Design the development of your entire portfolio, whether a few projects or many: you set a production target and limits, and the Designer runs all the projects, ranks them and decides which ones go in, at what pace and with how many rigs.
| Mode | What it does |
|---|---|
| Universe | Runs each block exactly as loaded, without taking it to maximum potential. |
| NPV ranking | Quick run at maximum potential, ranked by NPV, with a budget cut-off. |
| Maturity | You enter when each project can start and its maximum plateau. |
| Strategic | You run any of the above and then include or remove projects by hand. |
Target and rigs
- Choose the best projects or scale up the plateau of all of them.
- Live line against each period's target.
- Cap on wells per year for the whole run, distributed by NPV.
Quick levers
- Oil and gas price.
- CAPEX and OPEX per well.
- Ramp, wells per year and pace (off at 2×).
Charts and table
- Production by tier, operator or block, and drilling plan.
- Pareto and break-even against resources.
- IN or OUT per block; Excel and JSON.
Move the economics and see the effect instantly
Demo with saved results
Choose how many wells to drill and the type well's EUR, and watch how production, resource, CAPEX and the case's value change.
Open the demo →The nine levers, in the last step
- EUR per well
- Maximum wells
- Target plateau
- Rigs
- Base decline
- Oil price
- Income tax
- CAPEX per well
- OPEX per well
With three inline charts (production, wells and rigs) and points you drag along the curve.
Checkboxes and apply
Rigs follow the plan and Plateau follows the wells change the logic. The levers are a scenario: without Apply, the case returns to its original when you leave the step.
What comes out of each case
Economics
Full annual cash flow, income tax, NPV, IRR, payout and break-even.
Output
One-page executive summary: production, drilling, project data, reserves and indicators. It exports to PPT or PDF.
Excel and shared space
Per-block detail exports to Excel; the result is published to the company's space for TwinRock Partners to use Coming soon (today, as a JSON file).
The interface can be switched between Spanish and English in one click (the English version is being completed) and has several visual themes.
More things TwinRock does
Oil or gas type well
An Oil/Gas selector shows EUR, CAPEX per well and development cost (US$/bbl or US$/boe), with the lateral diagram and frac stages.
Quick EUR sensitivity
Minimum and maximum per year with a triangular distribution: "always the same case" for comparison, or random for exploration.
Backward target
You state how much you want to produce and when, and TwinRock calculates what is needed to get there.
NPV sensitivity
The effect of ±10% on each lever on NPV, calculated when you release the control.
Run at a partner's WI
Run the case at 100% of the block or net to a company's interest.
Spanish and English
Language switching in one click (the English interface is being completed) and several visual themes, including a dark one.
Each partner sees their share of the business
It takes the results the Modeler leaves in the company's space and shows the numbers according to each partner's working interest (WI). It does not include the engine: it only works with numbers already calculated. Coming soon Today they receive it as an exported file.
What it shows
- Annual cash flow and production.
- Wells to drill and rigs.
- Own NPV, IRR, payout and break-even.
- View by partner, block, operator or tier.
- A simulator with the same levers.
Tax calculated per company
The taxable profit of all of the partner's blocks is added up month by month, already scaled by their interest, and only then is the tax applied with loss carry-forward offsetting: a loss in one block offsets a gain in another.
Contact: sergio.penayo@twinrockenergy.com · +54 11 4927 5308