TwinRock Energy Intelligence
ESEN
TwinRock Modeler

An oil and gas business case, built in minutes

TwinRock Modeler builds the business case for oil and gas projects: it quickly models type wells and their production curves, and gets to the cash flow in a matter of minutes.

Inside, a convolution logic: each drilled well contributes its type curve and the model adds up all the cohorts while respecting drilling and operating constraints, shaping the production of however many wells are needed.

plateau202620402060

Illustration · base production and new wells

2025–2065horizon of each case
9live levers
4Designer modes
INPUTType wellDecline, EUR and geometry.
LOGICDrilling planWells per year, rigs and limits.
LOGICConvolutionEach cohort adds its curve.
OUTPUTProductionDeclining base plus new wells.
OUTPUTCash flowNPV, IRR, payout and break-even.
Power

The development engine decides when to drill each well

From the associated type well and the production you need to reach, it quickly works out when to drill each well to achieve that target.

The software's logic incorporates the project's drilling and operating constraints and builds the plan that comes closest to the production target; if those constraints are not enough, it shows you how much is missing.

Constraints

  • Block well inventory.
  • Rigs: wells per rig, per month and per year.
  • Cadence, ramp and plateau.

One type well per cohort

  • Each year can have its own EUR.
  • The base declines and new wells replace it.
  • Oil and gas.

Full cash flow

  • Revenue, royalties, OPEX and CAPEX.
  • Depreciation and tax.
  • Annual and cumulative, through 2065.

Quick to move

  • Nine live levers.
  • Up to three comparable scenarios.
  • From scratch or from a block.
A single tool

Planning, Control and Reporting

The same model is used to build the plan, track what happens in the field and present the results.

Planning

The plan, from each block to the portfolio

Well plan, rigs, production, investment, costs, taxes and NPV.

Control

Actual against plan

Integrated with Chapter IV of the Secretariat of Energy: actual and historical production, alongside the projections.

Reporting

Results ready to present

Excel, charts and reports for the board, partners and investors.

The key to the Modeler

From the block to the decision: Portfolio and Optimizer

A single block only tells you what that block is worth. The Portfolio and the Optimizer tell you what to do with all of them: what the company is worth and which projects go in to reach the target.

Many blocks

Portfolio: many blocks, one result

Run several blocks at once and combine them into a single result: the value of a company, an operator or the whole set. Each asset runs with its own plan and costs, on the same prices and the same tax regime.

Choose

Master Base or saved bases

Assets come from the Master Base or from your own bases; you can pick all of them, by operator or by tier.

Run

All together or by group

One click runs the whole portfolio; with «Run by group» you get a consolidated view by operator, by tier or by both.

See

Ranking and consolidated view

Ranking by asset (NPV, IRR, payout, break-even and CAPEX) and a consolidated case with its own Economics, Production and Output.

Outputs

Excel and JSON

One row per block with the annual 2025–2065 series, and a JSON file to take the result to TwinRock Partners.

Portfolio. Summary and ranking by asset for the 18 YPF blocks. Click to enlarge.
Consolidated. Economics of the 18 blocks together: a single cash flow. Click to enlarge.

Want to see how it is run?

A walkthrough of about 80 seconds: from selection to Excel.

Watch the video →See it in the manual
Deciding what gets in

Optimizer: which blocks get in to reach your target

You set a production target and limits; the Optimizer runs the blocks, ranks them and decides which ones get in, at what pace and with how many rigs.

Modes

Four ways to run

Universe (each block as is), NPV ranking (at maximum potential, with a budget cut-off), Maturity (when each project can start) and Strategic (you include or remove projects by hand).

Target

Production by period

For example, 1,200 kbbl/d by 2031, choosing the best projects or scaling up the plateau of all of them.

Limits

Capital, break-even and IRR

Capital up to the target year, maximum break-even, minimum IRR and only options with positive NPV.

Levers

Price, costs and pace

Oil and gas price, CAPEX and OPEX per well, ramp, wells per year and drilling pace, from off to 2×.

Optimizer. Target of 1,200 kbbl/d by 2031: the production of the blocks that get in, their drilling plan and the Pareto. Click to enlarge.
The four modes. Universe, NPV ranking, Maturity and Strategic, with the source, the universe and the constraints. Click to enlarge.

Want to see how it is run?

A walkthrough of about 90 seconds: from the target to the blocks that get in.

Watch the video →See it in the manual
How it scales

From simple to complete

You start with a few inputs and add detail only where you need it: each level adds control without forcing you through the next one.

SimplerMore complete
01

Benefits

A complete solution for deciding

Technical and economic analysis in one place, with reliable results and few input data. You compare scenarios in minutes and optimize capital allocation.

Smart drilling modeling

  • One type well projects the full plan.
  • Plateau and ramp build themselves.
  • Respects capacity, timing and resources.

Multi-project integration

  • Dozens of projects in a single file.
  • You add wells and projects with no fixed cap.
  • One project's production as the base of the next Coming soon

Dynamic cash flow

  • Automatic cash flow.
  • Configurable prices, royalties, taxes and WI.
  • Detailed OPEX and CAPEX.

Scenarios and valuation

  • Up to three comparable scenarios.
  • Sensitivities to production, prices and costs.
  • Saved cases to pick up later.
FastSolid results from few variables.
FlexibleAny type of oil project.
PowerfulLarge volumes without losing precision.
ProfessionalReports ready for investors.
Ideal for
Operating companiesOil consultantsEnergy investment analystsProduction engineersEconomic analystsPlanning and new-business managers
Applications

Possible uses

One project

Block evaluation

The business case of an oil or gas block: production, wells, cash flow, NPV, IRR and break-even.

Many projects

Portfolios

Run and consolidate dozens of projects, by company, operator or tier.

Volumes

Resource and reserve evaluation

Recoverable volumes per block from the type well and the development plan, in MMboe, MMbbl and BCF.

Capital

Investment prioritization

Which projects get in for a given budget, ranked by NPV, break-even or IRR.

Operations

Drilling and rig plan

How many wells per year, how many rigs are needed and when plateau is reached.

Transactions

Buy, sell and farm-in

Value a company's working interest (WI) in a block and its impact on cash flow.

Risk

Scenarios and sensitivities

Price, costs, EUR, wells and plateau: how much the result changes and how much the project can withstand.

Communication

Budget and investors

One-page summaries and reports ready for the board, partners or investors.

Screenshots

What TwinRock looks like

Real screenshots of the Modeler and the Production Designer, with example cases from the Master Base. The Designer is a tab of the Modeler: what you design passes to the rest of the model with one click. The screenshots show the interface in Spanish.

This is the Modeler. Levers on the left; production, wells per year, rigs and NPV sensitivity on the right, all recalculated when a lever is moved. Example case: La Amarga Chica, from the Master Base. Click to enlarge.
Output. One-page summary: production, drilling plan, project data, resources and indicators. Click to enlarge.
Economics. NPV, IRR, payout, CAPEX, EBITDA and taxes, with cumulative free cash flow and the payout marked. Click to enlarge.
Production Designer. Production as a sequence of ramps and plateaus, with points you drag on the chart. Click to enlarge.
Wells and rigs. What the plan uses and, in green, the maximum the drilling constraints allow. Click to enlarge.

Do you want to see how a case is built?

The manual walks through every step: building and saving cases, running portfolios, moving the economics and viewing results.

Open the manual →
Demo

See how it works

Five walkthroughs of 70 to 100 seconds, with music and step-by-step subtitles. They were recorded with the real Modeler, with no shortcuts.

Build a case

A case with the Master Base

Choose Loma Campana, go through the four selection steps, look at production and Economics, and download the Excel sheet by sheet.

Quick Run

A 100 km² case in minutes

Enter 11 inputs (area, lateral, EUR, plateau…) and get wells, rigs, production, economics and Excel.

New case

A case from scratch

Define the type well, the wells and the rigs, and watch the live result all the way to Excel.

Portfolio

Many blocks, one result

Choose the assets by operator or tier, run them together and see the ranking, the consolidated view and the Excel.

Optimizer

Which blocks get in to reach your target

Set the production target and the limits: the Optimizer decides which blocks get in and at what pace.

Tutorials

Complete tutorials

Three videos of 4 to 8 minutes, recorded with the real Modeler, to learn step by step.

7 min 45 s

A complete case: Bandurria Sur

An example case with a block from the Master Base, from selection to result.

4 min

Quick Run

How to build a quick case from just a few inputs.

5 min 27 s

A new case from scratch

How to define a case in the Modeler without starting from the base.

Step by step

A case from start to finish: La Amarga Chica

This is how a project is set up with a block from the Master Base, from choosing it to the final summary. Go through the nine steps and click any screenshot to see it larger.

Example case of La Amarga Chica with the base's data, run at 100% of the block and at 55 US$/bbl. The values change if you move the levers. The screenshots show the interface in Spanish.

Now try it

Add or remove wells and see the effect

An exercise with saved results: choose how many wells to drill, the type well's EUR and the plateau, and watch how production, resource, CAPEX and the case's value change.

This demo is limited

It only allows these three things

  • Wells: from 0 to 500.
  • Type well EUR: from 1,000 to 1,200 Mbbl.
  • Plateau: 50, 75 or 100 kbbl/d.

Everything else is fixed.

The real Modeler allows everything else

Without those limits

  • Custom type well: hyperbolic, exponential or combined curve; a different well per year or drawn between a minimum and a maximum EUR.
  • Development plan: ramp, plateau or year-by-year production target, with rigs, maximum wells and pace.
  • Full economics: royalties, taxes, CAPEX and OPEX by range, discounting, scenarios and sensitivities.
  • Portfolios and partners: many projects at once and each partner's view according to their interest.
Oil production

Production of the new wells plus the base

Associated type well

Curve of one well

Add or remove wells

What changes with 10 more or fewer wells?

Saved results from an example case. This page calculates nothing: it shows precalculated values for 0 to 500 wells, EUR from 1,000 to 1,200 Mbbl and plateau of 50, 75 or 100 kbbl/d. The value is an NPV at 10% before royalties and taxes, and the resource is drilled wells times EUR. The Modeler calculates each case with its engine, its constraints, royalties, taxes and each block's data.

Outputs

Customized Excel output

Available: the Excel output is built to order, according to what each client needs. The current standard delivers:

Case Excel · one sheet per topic
SheetWhat it includes
InputsAll of the case's assumptions in one place. The other sheets pull them in by formula.
Drilling scheduleMonth-by-month drilling plan: wells drilled, rigs required, frac stages and cumulative totals.
ProductionOil and gas, base and new production, potential and delivered, monthly.
PricesOil and gas price by date range.
CAPEXDrilling, completion, fracs, facilities and learning curve.
OPEXFixed, variable and semi-fixed oil and gas costs, and pulling/workover.
Cash FlowRevenue, royalties, OPEX, G&A and EBITDA, down to the case's cash flow.
Portfolio Excel

One row per block

For each block: operator, tier and the annual 2025–2065 series of oil and gas production (base and new), CAPEX, OPEX per boe, wells and plateau. Plus a summary with NPV, IRR, cash flow, well EUR, netback and break-even.

And also

One-page Output

Executive summary in PPT or PDF, and download of several cases together in a single presentation.

Do you need another format?

Tell us which columns, which periods and which cuts you want to see, and we will build it to order.

Write to us →
Service

Shared use: each company in its own space Coming soon

TwinRock is offered as a service: you log in with your username and password to a server and your company works in its own space. No one sees another company's data, and within yours the team shares bases and cases.

Log in with username and passwordCompany Aown spaceteam sharing its own workbasescasesresultsCompany Bown spaceteam sharing its own workbasescasesresultsCompany Cown spaceteam sharing its own workbasescasesresultsTwinRock calculation engine · on the server · the code is not downloadedThe dotted lines separate the companies: what one saves cannot be seen or opened from another.

Login and accounts

  • Each person has a username and password.
  • Each user belongs to a single company.
  • The administrator adds and removes team members.

One space per company

  • Bases, cases, scenarios and results stay in the company's space.
  • No other company can see them.
  • Protected bases are not overwritten by mistake.

Team within the company

  • Several users work on the same bases and cases.
  • Roles: administers, edits or view-only.
  • A saved case can be opened by anyone with permission.

Protected engine

  • The calculation runs on the server.
  • Results reach your screen; the logic is not downloaded.
  • The Master Base is enabled per company, as an add-on.

And TwinRock Partners still exists

It is each partner's view: it takes the results from the company's space and shows each one only their share, according to their working interest (WI). With the service, the results file no longer travels from hand to hand.

TopicTodayWith the service
AccessYou open the HTML fileUsername and password
Saved casesIn the browser of whoever creates themIn the company's space
TeamworkExchanging filesSame bases and cases for everyone
Other companiesEach file belongs to whoever holds itEach company sees only its own
PartnersExported JSON fileResults from the company's space
Calculation engineInside the fileOn the server
Contact

Let's talk

Write or call us to request a demonstration or to ask about the Vaca Muerta base.

Email

sergio.penayo@twinrockenergy.com

Phone

+54 11 4927 5308